Bathroom sets with shower curtain – Find a shower curtain that goes with the decor of your bathroom can be difficult. If you find the color or perfect design in a fabric store, you can turn that material, whether upholstery, outdoor or cotton, in a shade of bath personalized using some basic knowledge of sewing and a few materials. Measure the space where you hang the shower curtain. Note the width of the bar shower and the height measurement from the bar to the ground. Your width measurement multiplied by 1.4 and rounded up to a round number.
Iron the fabric to remove the wrinkles. If the fabric need to bathroom sets with shower curtain be assembled to be large enough for the shower, sews the pieces with margins of 1/4 inch (0.6 centimeters). Open the seams with the iron. Fold in both sides of the curtain 1/2 inch (1.2 cm). Folded again into 1/2 inch, iron and fastened with pins. Sew a hem on each side with the sewing machine using a margin of 1/4 inch (0.6 centimeters).
Fold 1/2 inch (1.2 cm) on the sides, top and bottom curtain bathroom and brand with the iron. He bends again sides top and bottom 3 inches (7.5 centimeters), iron and subject with pins. Sew the top and bottom hems with a margin of 1/4 inch (0.6 centimeters) from the inside edge. Measure the top edge of the curtain to bathroom sets with shower curtain fit buttonholes. These should be placed every 1 foot (30 cm) around the top edge of the curtain, to 1/2 inch (1.2 cm) from the edge. Mark buttonholes site with fabric chalk.